Substrate treatment:

◎ new wall surface - remove dust, grease and loose ash. If there are pores, repair them in time to ensure the wall is clean, dry and smooth.

◎ heavy coating metope - remove the old wall paint film is not firm, remove dust powder and impurities, leveling, polishing, cleaning and thoroughly dry;

◎ ensure that the surface humidity of pre-coated substrate is 10% lower and the PH value is less than 10;

◎ the surface of pre-coated substrate must be firm, dry, clean, flat and free of loose matter.

Construction method: roller, brush and spray

Construction conditions: please do not work in wet or cold weather (the temperature is below 5℃, the relative humidity is 85%), otherwise the expected effect cannot be achieved. Before construction, the paint should be stirred evenly, and coated with a matching primer. It is forbidden to mix with other coatings.

Maintenance time: 7 days /25℃, low temperature (not low dry 5℃) should be appropriately extended, in order to obtain the ideal paint film effect.

Dilution: according to the construction needs, add less than 10% of water dilution; Stir well before use.

Cleaning: please wash all the appliances with water immediately after the painting stops or finishes.

Storage conditions: sealed storage in a cool dry place at 0-35℃.

Validity period: 18 months

Execution standard: GB/T 9755-2001